What is the workflow of the labeling machine?

The labeling machine shall affix the information of the product in the form of a label on the surface of the product. For example, chili sauces, soy bean pastes, etc. in the supermarket with important information such as date of manufacture, shelf life, product ingredients, etc. marked. Help the consumer look it up.

• What are the labeling head mechanisms of the labeling machine?

• How do I set the pressure brush device of the labeling machine?

• What is the workflow of the labeling machine?

What are the labeling head mechanisms of the labeling machine?

Unwinding mechanism: It can realize the placement and release of the roll to be labeled. Of the three aspects of the stiffness of the rolling mechanism, smooth running and reliability of the brake disc, it is the most balanced. The equipment is mainly used in the placement of roll labels in self-adhesive labeling machines.

Brake buffer: The mechanism is connected to the spring and can swing back and forth. During the drawing process of the label, it acts as tension, keeps the material in contact with the rollers and prevents the material from breaking.

Pulling roller: used to guide and position the roller label.

Pull mechanism: Provides the power to pull the label. It is the most important in terms of the convenience of traction adjustment, traction slip and convenience of winding the marking.

Rewind mechanism: It can realize the recycling of label carrier paper. It is the most important in terms of the reliability of the elevator mechanism and the service life of the winding.

Peeling mechanism: It can realize the smooth peeling of label and label carrier paper. The best balance comes from three aspects: smoothness when peeling off the label, convenience when wrapping the label and convenience when adjusting the label.

How do I set the pressure brush device of the labeling machine?

The center of the labeling machine's labeling brush aligns with the label and is symmetrical on both sides and perpendicular to the container surface. The overlap gap of the container sweeping pressure brushes is as follows: a single pressure brush is 10mm to 15mm and a combined pressure brush 5 mm to 10mm. The position of the sponge cleaning brush is 1mm to 2mm. The bottle press head should be 20mm lower without bottle than with bottle.

What is the workflow of the labeling machine?

The label of the labeling machine is applied to the carton, with the labeling wheel moving at the same speed as the carton. When the conveyor reaches a certain position, the drive wheel of the label tape accelerates to a speed equal to that of the conveyor belt and brakes to a standstill after the label is applied.

Since the label tape can slip, it is provided with a registration mark to ensure that each label is placed correctly. The registration mark is read by a sensor and during the belt deceleration phase the drive wheels are repositioned to correct any mispositioning on the belt.

Shanghai Paixie Packaging Machinery Co., Ltd., the pioneer of labeling machine manufacturer in China, knows that every application is special. You can go and get more information about them.