How does the filling machine work?

The operation of the filling machine is simple, the accuracy error is small, and it is very convenient in installation setting, equipment cleaning, maintenance, etc. Positioning system and liquid level control system for bottle mouth positioning.

How does the filling machine work?

What is the workflow of the filling machine?

What are the main components of the filling machine?

How does the filling machine work?

The filling machine is driven by the gear machine, so all aspects can coordinate the division of labor and really achieve the effect of linking. A special infrared sensor is located on the bottle feeding track to receive the induction. When the bottle reaches a certain number, it automatically jams the next bottle. No bottle, no filling, when the bottle enters the lower position of the filling head, stop other work sections, only the filling head works, when the bottle leaves, the filling head stops working, the rail part works, and the bottle cap is published. The clean bottles from the bottle washing machine are transported via the bottle conveyor belt to the bottle feeding screw of the filling machine and then transported through the bottle feeding star to the bottle carrying cylinder of the turntable and lifted.

What is the workflow of the filling machine?

The filling machine is mainly divided into storage tank, filling host and frequency conversion speed control transmission module. The liquid filling tank of the liquid filling machine is located on the top of the device. It is a barometric pressure sensor with a level sensor and a solenoid valve for feeding. Through the solenoid valve, the liquid material conveyed by the pre-process of the filling machine enters the storage container. When the appropriate liquid level is reached, the liquid level sensor sends a signal to close and stop feeding; When the material surface falls to the intended position, it opens automatically. Enter the solenoid valve. In the lower part of the storage tank, the outlet is connected to the suction pipe of the main liquid-filled machine via a pipeline. When the main machine is working, the liquid in the liquid storage tank is sucked into the piston cylinder and sprayed into the bottle through the nozzle.

What are the main components of the filling machine?

The main filling device of the filling machine is the main equipment for completing the filling process. On the front of the main engine are several refueling heads, and on both sides are liquid collection cylinders. Each cylinder corresponds to a refueling head. The liquid in the tank is sucked into the cylinder, then pressed and poured through the filling head into the corresponding bottle. A tiny cylinder on the filling head drives a small piston to open and close the nozzle of the filling head, which acts as a valve. When filling begins, insert the nozzle into the bottle, open the small piston at a certain distance from the bottle bottom and start filling. Fill the head and edge until the filling is complete, then close the nozzle and lift it to the bottle position. On one side of the filling station there are two cylinder-operated stoppers (one on top of the bottle and the other on top of the bottle) that work together with the bottle opener at the filling station to refuel.

Shanghai Paixie Packaging Machinery Co., Ltd. as a Chinese pioneer in filling machines can ensure the quality and after-sales service of their product.